FountainPro 65GPH 12V AC Submersible Pond or Fountain Pump, WA65LV

FountainPro 65GPH 12V AC Submersible Pond or Fountain Pump, WA65LV
Item# FP-WA65LVP-PPB
$23.45

This item is currently out of stock!

FountainPro Professional Series WA65LVP reliable and ultra-quiet mag drive submersible pond or fountain water pump.  Easy water flow adjustment.  Suitable for fountains, ponds, aquariums and industrial tanks.  Pump flow rate 65GPH, maximum head (water lift) 2.1 feet (25"), suction cup feet, 12V AC (12 Volts Alternating Current), .30A, 4W (watts).  Pump dimensions: 1-7/8"L x 1-3/4"W x 1-5/8"H (industry standard total size measurements always include fitting in height measurement.)  Outlet fittings: 5/16" ID and 1/2" ID.  Removable filter screen and impeller for easy cleaning.  Compatible with low voltage landscape pond and lighting transformers, runs on 12V AC (volts) 20 foot cord with spade lugs.  No stopper on cord, replacement pumps do not come with stoppers.  One-year manufacturer warranty.



Replacement cross-reference: WA65LVP, WA65LV

Back Ordered

Recommended tubing:
2 feet, 1/4 ID, 1/16 wall, Black Flexible PVC #AP-V0143PBK
2 feet, 1/2 ID, 1/16 wall, Black Flexible PVC #AP-V0123PBK

Accessories

Custom Cut Alpine Black Fountain / Pond Tubing
This exceptional line of black tubing is recommended for use in water gardening as it is practically invisible underwater.  Sunlight will not penetrate it, so algae growth inside is inhibited.  Constructed of flexible, plasticized polyvinyl chloride (PVC).  Non-toxic, fish safe.  Use for fountains, ponds, air conditioning and refrigeration condensation drain, condensation pump discharge line, humidifier overflow and many more industrial and domestic uses.  Temperature range +25F to +150F.

What length and tubing thickness is for my application?
1/16" wall thickness is quite flexible, good for fountains.  1/8" wall thickness is considerably stiffer although still flexible, better suited for ponds, buried longer pond runs.  Length of tubing needed is recommended on most our pump descriptions to make this easy.  The required head (water lift) measurement is closest to the length of tubing needed; for a fountain this is the bowl bottom to highest point water flows over measurement.  Ordering tubing same length as maximum head stated on pump would be incorrect, because there is no water flow at maximum head, always the tubing length needed will be less than maximum head measurement.

For Tubing Rolls and Large ID Tubing, see "Ponds page 2"
Out of stock >>  Cut or Roll #V0143PBK 1/4 inch ID x 3/8 inch OD x 1/16 inch wall thickness, working pressure 55PSI @ 69F
Out of stock >>  Cut or Roll #V0383PBK 3/8 inch ID x 1/2 inch OD x 1/16 inch wall thickness, working pressure 45PSI @ 69F
Cut or Roll #V0123PBK 1/2 inch ID x 5/8 inch OD x 1/16 inch wall thickness, working pressure 30PSI @ 69F
Cut or Roll #V0127PBK 1/2 inch ID x 3/4 inch OD x 1/8 inch wall thickness, working pressure 45PSI @ 69F
Cut or Roll #V0583PBK 5/8 inch ID x 3/4 inch OD x 1/16 inch wall thickness, working pressure 30PSI @ 69F
Cut or Roll #V0587PBK 5/8 inch ID x 7/8 inch OD x 1/8 inch wall thickness, working pressure 40PSI @ 69F
Cut or Roll #V0347PBK 3/4 inch ID x 1 inch OD x 1/8 inch wall thickness, working pressure 35PSI @ 69F
Roll only #V0017PBK 100' 1 inch ID x 1-1/4 inch OD x 1/8 inch wall thickness, working pressure 28PSI @ 69F
Roll only #V01147PBK 50' 1-1/4 inch ID x 1-1/2 inch OD x 1/8 inch wall thickness, working pressure 25PSI @ 69F
$3.99
AP-CUSTOMTUBING
Cut Tubing: 
60 Watt Transformer with Photo Cell / Timer for Pond/Fountain/Garden Lights/Pumps PL102T
Alpine 60 watt transformer with constant on and photo cell with timer provides 12V (volts) AC, use for garden lights, submersible pond lights, pumps.  Once it gets dark, the photocell and timer will immediately activate.  Settings on dial: off, on; photocell: automatic, 4, 6 or 8 hours.  12V (volt) connection is screw terminals.  Circuit breaker for short circuit protection on output.  Use indoor/outdoor, includes 4-light quick connect cable.  Wall mountable, includes screw and wall anchor.  Do not exceed the wattage of the transformer in any combination.  Alpine two year manufacturer warranty.

Only 7 left!
Regular price: $56.85
Clearance price: $54.99
AP-PL102T-C-PRRA
FountainPro Submersible 10 Watt (10W) Halogen Fountain/Pond Tube Light, WTL1020
Submersible 10 watt (10W) halogen fountain or pond tube/pen/finger light with 20-foot cord and spade lug connectors.  Designed to use with 12V outdoor underwater lighting transformers.  Landscape transformer compatible.  For underwater use only.  No stopper on cord, replacement parts do not come with stoppers.  One-year limited guarantee.  Manufacturer: FountainPro.  Replacement bulb is JC5011.
$21.49
FP-WTL1020-CPBW
Spare Clear Lens: 
Ecological Laboratories Microbe-Lift Fountain Clear 4-ounce 10TTFC4
Microbe-Lift Fountain Clear, for large fountains, waterfalls or small tabletop fountains, with its bio-enzymatic activity, prevents the buildup of mineral deposits and organic stains such as scale, iron, copper and hard water stains and helps keep water clear and free from organic debris.  Made from natural ingredients, Fountain Clear is biodegradable and non-toxic; safe for birds, fish, aquatic life, humans, pets, plants, lawns and wildlife.

Microbe-Lift products are made from a formulation of many naturally occurring non-pathogenic bacterial strains that work aerobically or anaerobically, with or without light, and in environments from low-to-high acidity, and low-to-high alkalinity.

The 4 ounce size, up to 34 treatments, is for small fountains under 1 gallon capacity; pour 1/2 capful per week directly into water.  For every 5 gallons, add one capful weekly.  Made in USA.  Manufacturer: Ecological Laboratories.

Also available in 16 ounce bottles.
$11.70
EL-10TTFC4-C-CPBG
Ecological Laboratories Microbe-Lift Fountain Clear 16-ounce 10LFC16
Microbe-Lift Fountain Clear, for large fountains, waterfalls or small tabletop fountains, with its bio-enzymatic activity, prevents the buildup of mineral deposits and organic stains such as scale, iron, copper and hard water stains and helps keep water clear and free from organic debris.  Made from natural ingredients, Fountain Clear is biodegradable and non-toxic; safe for birds, fish, aquatic life, humans, pets, plants, lawns and wildlife.

Microbe-Lift products are made from a formulation of many naturally occurring non-pathogenic bacterial strains that work aerobically or anaerobically, with or without light, and in environments from low-to-high acidity, and low-to-high alkalinity.

The 16 ounce size treats up 6400 gallons.  For each 100 gallons of water, pour one capful per week directly into water.  Made in USA.  Manufacturer: Ecological Laboratories.
$23.05
EL-10LFC16-C-PPB